CYLINDER / CYLINDER HEAD / PISTON(RE COMPACT 2S BS4 PROVISIONAL)
- $0.00
CYLINDER / CYLINDER HEAD / PISTON
(RE COMPACT 2S BS4 PROVISIONAL)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty. ES 24 | Qty. ES AG | Qty. ES AS | Qty. NES 24 | Qty. NES AG | Qty. NES AS | Remarks |
|---|---|---|---|---|---|---|---|---|---|
| 01 | 24101978 | Assly cyl. Block piston | 1 | - | - | 1 | - | - | |
| 01 | AS 1010 16 | Assly cyl. block piston | - | 1 | 1 | - | 1 | 1 | |
| 02 | 24101925 | Assembly piston samkrg | 1 | 1 | 1 | 1 | 1 | 1 | |
| 03 | 06 1011 96 | Gudgeon pin-samkrg | 1 | 1 | 1 | 1 | 1 | 1 | |
| 04 | 39034017 | Internal circlip | 2 | 2 | 2 | 2 | 2 | 2 | |
| 05 | JB 1510 20 | Hook speedo cable | 1 | 1 | 1 | 1 | 1 | 1 | |
| 06 | AP 1010 05 | Gasket cyl block | 1 | 1 | 1 | 1 | 1 | 1 | |
| 07 | AP 1210 73 | Assy rail oil feed | 1 | 1 | 1 | 1 | 1 | 1 | |
| 08 | 39102304 | Bolt rail | 2 | 2 | 2 | 2 | 2 | 2 | |
| 09 | 31121006 | Gasket | 4 | 4 | 4 | 4 | 4 | 4 | |
| 10 | 39142305 | Stud - M8 | 2 | 2 | 2 | 2 | 2 | 2 | |
| 11 | 24101777 | Cylinder head with damper | 1 | 1 | 1 | 1 | 1 | 1 | alt-52200712 |
| 11 | 24101790 | Cylinder head | 1 | 1 | 1 | 1 | 1 | 1 | alt-52200712 |
| 12 | AP 1010 50 | Damper A | 2 | 2 | 2 | 2 | 2 | 2 | |
| 13 | AP 1010 51 | Damper B | 2 | 2 | 2 | 2 | 2 | 2 | |
| 14 | 24101723 | Gasket head cylinder | 1 | 1 | 1 | 1 | 1 | 1 | |
| 15 | 39100006 | Hollow dowel pin | 2 | 2 | 2 | 2 | 2 | 2 | |
| 16 | 24116149 | Plug spark :- wr4ac (mico) | 1 | 1 | 1 | 1 | 1 | 1 | |
| 17 | AP 1012 09 | Nut flange | 4 | 4 | 4 | 4 | 4 | 4 | |
| 18 | AP 1210 86 | Grommet oil rail | 1 | 1 | 1 | 1 | 1 | 1 | |
| 19 | 24101971 | Assembly shroud LH | 1 | 1 | 1 | 1 | 1 | 1 | |
| 20 | 39167504 | Bolt f for Shroud | 4 | 4 | 4 | 4 | 4 | 4 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | RE COMPACT 2S BS4 PROVISIONAL |
| Engine | RE COMPACT 2S BS4 PROVISIONAL |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
