ENGINE & CRANKCASE CLUTCH SIDE(RE 205 M SPC)
- $0.00
ENGINE & CRANKCASE CLUTCH SIDE
(RE 205 M SPC)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity CNG | Quantity LPG | Remarks |
|---|---|---|---|---|---|
| 01 | AZ 5010 01 | Engine Assly. comp. | 1 | -- | N.I. |
| 01 | RA 5010 01 | Engine Assly. comp. | -- | 1 | |
| 02 | AA 1011 23 | Spring plate upper | 1 | 1 | |
| 03 | AA 1012 49 | Spacer pad - hand start | 1 | 1 | |
| 04 | AA 1011 24 | Spring plate lower | 1 | 1 | |
| 05 | 39050809 | Rivet | 2 | 2 | |
| 06 | 39101321 | 'O' ring | 1 | 1 | |
| 07 | AA 1011 45 | Bush starter gear | 1 | 1 | |
| 08 | 39171905 | Stud (Long) | 2 | 2 | |
| 09 | 39068205 | Stud (Short) | 2 | 2 | |
| 10 | AA 1011 43 | Rubber pad | 1 | 1 | |
| 11 | 39121420 | Ball bearing | 1 | 1 | |
| 12 | 21170419 | Circlip | 1 | 1 | |
| 13 | 03 1003 35 | Needle roller bearing | 1 | 1 | |
| 14 | AA 1010 04 | Guide chain metallic | 1 | 1 | |
| 15 | 39074501 | Scrow pan cross - M6 | 1 | 1 | |
| 16 | AB 1010 14 | Guide starter gear | 1 | 1 | |
| 17 | 39100006 | Hollow dowel pin | 2 | 2 | |
| 18 | 39107504 | Bolt flanged small | 6 | 6 | |
| 19 | 39167604 | Bolt flanged small | 6 | 6 | |
| 20 | AA 1013 28 | Gasket (Crankcase) | 1 | 1 | |
| 21 | DU 1012 23 | Plug drain (magnetic) | 1 | 1 | |
| 22 | 39179611 | Plain washer | 1 | 1 | |
| 23 | AN 1010 70 | Crank case clutch side | 1 | 1 | |
| 24 | 39163015 | Nut flange | 2 | 2 | |
| 25 | AA 1012 21 | Tube assly. | 1 | 1 | |
| 26 | 28101080 | Rubber bush | 1 | 1 | |
| 27 | 31101106 | Gasket | 1 | 1 | NI |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | RE 205 M |
| Engine | RE 205 M |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
