CRANKCASE CLUTCH SIDE(RE 4S BSIV PROVISIONAL)
- $0.00
CRANKCASE CLUTCH SIDE
(RE 4S BSIV PROVISIONAL)
| Sub-part-figure Number | Item Code | Sub Part Name | AA | AF COMPACT | AM | AZ | RA COMPACT+ | AN CARGO | Remarks |
|---|---|---|---|---|---|---|---|---|---|
| 01 | AN101127 | Crank case clutch side | 1 | 1 | 1 | 1 | 1 | 1 | |
| 02 | AA101123 | Spring plate upper | 1 | 1 | 1 | - | - | - | |
| 03 | AA101249 | Spacer pad - hand start | 1 | 1 | 1 | - | - | - | |
| 04 | AA101124 | Spring plate lower | 1 | 1 | 1 | - | - | - | |
| 05 | 39050809 | Rivet | 2 | 2 | 2 | - | - | - | |
| 06 | 39101321 | 'O' ring | 1 | 1 | 1 | - | - | - | |
| 07 | AA101145 | Bushstarter gear | 1 | 1 | 1 | - | - | - | |
| 08 | AA101143 | Rubber pad | 1 | 1 | 1 | - | - | - | |
| 09 | AB101014 | Guide starter gear | 1 | 1 | 1 | - | - | - | |
| 10 | LAD00062 | Bolt flanged M6X1X105L | 2 | 2 | 2 | 2 | 2 | 2 | |
| 11 | 59050002 | Stud | 2 | 2 | 2 | 2 | 2 | 2 | |
| 12 | 39121420 | Ball bearing | 1 | 1 | 1 | 1 | 1 | 1 | |
| 13 | 21170419 | Circlip | 1 | 1 | 1 | 1 | 1 | 1 | |
| 14 | 03100335 | Needle roller bearing | 1 | 1 | 1 | 1 | 1 | 1 | |
| 15 | 39100006 | Hollow dowel pin | 2 | 2 | 2 | 2 | 2 | 2 | |
| 16 | DP101154 | Plug | 1 | 1 | 1 | 1 | 1 | 1 | |
| 17 | 39167604 | Bolt flanged small | 2 | 2 | 2 | 2 | 2 | 2 | |
| 18 | AN101129 | Gasket (Crankcase) | 1 | 1 | 1 | 1 | 1 | 1 | |
| 19 | DH101661 | Drain plug | 1 | 1 | 1 | 1 | 1 | 1 | |
| 20 | 31101106 | Gasket (stopper roc.arm) | 1 | 1 | 1 | 1 | 1 | 1 | |
| 21 | 39105515 | Hex nut flange M10 | 2 | 2 | 2 | 2 | 2 | 2 | |
| 22 | AA101221 | Tube assembly | 1 | 1 | 1 | 1 | 1 | 1 | |
| 23 | 28101080 | Bush - rubber | 1 | 1 | 1 | 1 | 1 | 1 | |
| 24 | 39074601 | Screw pan cross-M6 | 2 | 2 | 2 | 2 | 2 | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | RE 4S BSIV PROVISIONAL |
| Engine | RE 4S BSIV |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
