Cover Clutch(PULSAR 180 UG_BS IV)
- $0.00
Cover Clutch
(PULSAR 180 UG_BS IV)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | 36 DJ40 82 | Kit Assembly Cyl. Cover Slate Gray | 1 | |
| 02 | DH 1011 97 | Grommet Breather | 1 | |
| 03 | DH 1011 42 | Shaft Clutch Release | 1 | |
| 04 | 39104119 | Seal Clutch Lever | 1 | |
| 05 | DH 1011 41 | Rack | 1 | |
| 06 | DH 1011 52 | ‘O’ Ring | 1 | |
| 07 | DK 1012 51 | Parallel Pin | 1 | |
| 08 | DG 1014 18 | Gauge | 1 | |
| 09 | DS 1012 15 | Clip Wire | 1 | |
| 10 | DS 1013 53 | Bolt | 10 | |
| 11 | 39099906 | Pin Dowel | 2 | |
| 12 | DH 1010 18 | Bracket Clutch Cable | 1 | |
| 13 | DH 1011 54 | Gasket Cover RH | 1 | |
| 14 | DK 1014 80 | Plunger Oil | 1 | |
| 15 | DH 1210 11 | Plate Plunger Oil | 1 | |
| 16 | DH 1210 12 | Spring Joint ‘A’ | 1 | |
| 17 | DH 1015 44 | Spring Torsion Clutch Lever | 1 | |
| 18 | 39244311 | Washer | 1 | |
| 19 | DK 1017 38 | Decal DTS-I | 1 | |
| 20 | 39199020 | Bearing Needle | 1 | |
| 21 | DS 1010 71 | Cap Oil Filler | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR 180 UG BS IV |
| Engine | 180 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
