Cylinder Head(Pulsar-RS-200-BS3)
- $0.00
Cylinder Head
(Pulsar-RS-200-BS3)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty. ABS | Qty. NON ABS | Remarks |
|---|---|---|---|---|---|
| 01 | JG 5410 68 | Hex Flange Head Bolt M10 | 4 | 4 | |
| 02 | LD A000 08 | Washer 11.2*20*2T | 4 | 4 | |
| 03 | JL 5110 09 | M6 Stud Bolt | 2 | 2 | |
| 04 | 36 DT00 32 | Kit Asly Cylinder Head | 1 | 1 | Refer Page No.115 |
| 05 | JG 5110 46 | (M8*1.25) | 2 | 2 | |
| 06 | JL 5110 22 | Gasket Cylinder Head | 1 | 1 | |
| 07 | JL 5112 19 | Sleeve Spark Plug | 1 | 1 | |
| 08 | 39262921 | ‘O’ Ring Sleeve | 1 | 1 | Top side |
| 09 | 39128321 | ‘O’ Ring Sleeve | 1 | 1 | Bottom side |
| 10 | KA EQ06 20 | Bolt - Flange M6 | 2 | 2 | |
| 11 | JL 5110 29 | Cover Thermostat | 1 | 1 | |
| 12 | JL 6012 37 | Thermostat Assembly | 1 | 1 | |
| 12A | JL 6012 25 | Seal Thermostat | 1 | 1 | |
| 13 | JG 3514 00 | Coolant Water Temp Sensor | 1 | 1 | |
| 14 | DK 1012 25 | Switch Oil Pressure | 1 | 1 | |
| 15 | 39260801 | Grub Screw | 1 | 1 | |
| 16 | 39269920 | ‘O’ Ring Water Temp Sensor | 1 | 1 | |
| 17 | JG 5814 07 | O-ring Pipe Intake_g2 | 1 | 1 | |
| 18 | JL 5810 39 | Pipe Intake | 1 | 1 | |
| 19 | LB C000 02 | Screw Csk Cross | 3 | 3 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar -RS-200-BS3 |
| Engine | 200 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
