FRONT FORK(Pulsar 180 SPC UG3)
- $0.00
FRONT FORK
(Pulsar 180 SPC UG3)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DJ 1811 00 | Fork front | 1 | |
| 02 | 36 DK00 20 | Kit outer tube | 1 | Ref. Page No.60 |
| 03 | DJ 1810 87 | Oil seal | 2 | |
| 04 | DJ 1811 01 | Outer Tube LH | 1 | |
| 05 | DJ 1811 02 | Outer Tube RH | 1 | |
| 06 | 30181026 | Gasket | 2 | |
| 07 | 30181025 | Bolt | 2 | |
| 08 | DS 1810 77 | Cylinder comp. fork | 2 | |
| 09 | DJ 1811 03 | Pipe comp. suspension inner | 2 | |
| 10 | DS 1810 71 | Slide Bush | 2 | |
| 11 | DJ 1810 45 | Clamp for Bellow | 2 | |
| 12 | DJ 1810 44 | Bellow | 2 | |
| 13 | DJ 1811 04 | Spring front fork | 2 | |
| 14 | DH 1810 09 | Grommet Top | 2 | |
| 15 | DH 1810 15 | Bolt fork | 2 | |
| 16 | 30181029 | ‘O’ ring | 2 | |
| 17 | 30181028 | Seat fork spring | 2 | |
| 18 | DS 1810 85 | Spacer Tube | 2 | |
| 19 | DM 1810 10 | Washer | 2 | |
| 20 | 30181044 | Bolt | 1 | |
| 21 | DH 1810 56 | Holder fork upper | 1 | |
| 22 | DG 1810 08 | Socket Bolt | 2 | |
| 23 | DJ 1810 85 | Cushion Rubber | 2 | |
| 24 | DJ 1810 52 | Cover Trail B | 4 | |
| 25 | DH 1810 48 | Lamp Shade asly. | 1 | |
| 26 | DH 1810 23 | Bearing cone | 1 | |
| 27 | DJ 1810 41 | Holder fork under | 1 | |
| 28 | 39078912 | Spring washer | 2 | |
| 29 | 39181304 | Bolt | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 180 UG3. |
| Engine | 180 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
