Sub-part-figure Number | Item Code | Sub Part Name | ES Drum | Remarks |
---|---|---|---|---|
01 | 36 JK00 34 | Crankcase LH | 1 | NRB + Orifice |
02 | 39 2562 20 | Needle roller bearing | 1 | Input Shaft |
03 | 59 2000 36 | Ball bearing | 1 | Output Shaft |
04 | 39 1715 19 | Oil seal 22x3.5x7 | 1 | Output shaft |
05 | 31 2010 81 | Switch neutral | 1 | |
06 | DH 1012 64 | Gasket neutral switch | 1 | Alt. Dh101784 |
07 | 39 2190 19 | Oil seal | 1 | Shifter shaft |
08 | JA 5410 05 | Bush bendix | 1 | Starter clutch |
09 | 39 0746 01 | Pan cross screw | 2 | |
10 | JA 5410 34 | Stopper gear starter clutch | 1 | |
11 | 39 1000 06 | Hollow dowel pin | 2 | Crankcase block mtg clutch cover + magneto cover |
12 | 39 0999 06 | Dowel pin oil pump | 2 | |
13 | JA 5410 19 | Mesh filter oil pump | 1 | |
14 | 59 2100 23 | "O" ring cap strainer | 1 | |
15 | JA 5410 21 | Cap strainer | 1 | |
16 | 59 0400 38 | Flange bolt | 6 | |
17 | 39 1759 04 | Bolt (M6x1x55L) | 1 | Near starter motor |
18 | JA 5410 20 | "O" ring mesh filter oil pump | 1 | |
19 | JA 5410 27 | Damper crank Shaft | 1 |
Specification | |
Quality | Bajaj Geniune Parts |
Model | Platina 125 CC |
Engine | 125 CC |
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
+91 9970880000