Crankcase LH(Avenger 220 SPC REV 05AUG16)
- $0.00
Crankcase LH
(Avenger 220 SPC REV 05AUG16)
| Sub-part-figure Number | Item Code | Sub Part Name | Cruise Qty | Street Qty | Remarks |
|---|---|---|---|---|---|
| 01 | 36 PD00 13 | Kit Assly Crankcase LH | 1 | 1 | Refer Page No. 109 |
| 02 | 59 0500 02 | Stud | 2 | 2 | |
| 03 | DK 1010 94 | Guide starter assly | 1 | 1 | |
| 04 | 39 2188 19 | Oil Seal | 1 | 1 | |
| 05 | 59 2100 06 | ‘O’ Ring | 1 | 1 | |
| 06 | DK 1010 97 | Damper | 1 | 1 | |
| 07 | 39 0752 01 | C’ Sunk Head Screw | 3 | 3 | |
| 08 | 39 2603 20 | Bearing Ball (For Input shaft) | 1 | 1 | |
| 09 | 59 2000 06 | Bearing Ball (For Output shaft) | 1 | 1 | |
| 10 | 39 2185 20 | Balancer LH Bearing | 1 | 1 | |
| 11 | 30 1010 14 | Oil Seal (For Output shaft) | 1 | 1 | |
| 12 | 39 2190 19 | Oil Seal (For Shift lever) | 1 | 1 | |
| 13 | DH 1012 03 | Breather pipe fitting | 1 | 1 | |
| 14 | DH 1016 61 | Plug (Drain Bolt) | 1 | 1 | |
| 15 | 31 1011 06 | Washer (Gasket For Drain Bolt) | 1 | 1 | |
| 16 | DK 1013 80 | Switch comp. (Neutral) | 1 | 1 | |
| 17 | KJ AB10 19 | ‘O’ ring neutral switch | 1 | 1 | |
| 18 | 39 1677 04 | Bolt | 8 | 8 | |
| 19 | 39 2305 04 | Bolt | 1 | 1 | |
| 20 | 39 2448 11 | Plain Washer | 1 | 1 | |
| 21 | DJ 2010 21 | Cable assly. (Battery to Earth) | 1 | 1 | |
| 22 | 39 2180 06 | Hallow dowel pin | 2 | 2 | |
| 23 | 39 2181 06 | Hallow dowel pin | 2 | 2 | |
| 24 | DH 1013 85 | Bolt M6X16 (Neutral Switch) | 1 | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Avenger 220 SPC 5 AUG 16 |
| Engine | 220 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
