Sub-part-figure Number | Item Code | Sub Part Name | QTY. BA | QTY. BH | QTY. BB | QTY. AL | REMARKS |
---|---|---|---|---|---|---|---|
01 | BH191052 | Driver seat frame | - | 1 | - | - | |
01a | BH191075 | Driver seat frame - Z | - | 1 | - | - | |
02 | 39167204 | Flange bolt-m6 x 16 | - | 2 | - | - | |
03 | BH191032 | Bracket seat base mtg | - | 2 | - | - | |
04 | 39155604 | Bolt Flange | - | 4 | - | - | |
05 | 24211029 | Assbly seat driver | - | 1 | - | - | |
05a | AZ191005 | Assly cushion driver seat - Z | - | 1 | - | - | |
06 | BH191019 | Driver backrest | - | 1 | - | - | |
07 | 39197215 | Nut - Hexagon with flange-M5 | - | 4 | - | - | |
08 | BH191009 | Seat assly passenger | - | 1 | - | - | |
08a | BH191063 | Foam passenger seat cushion - Z | - | 1 | - | - | |
09 | 39155604 | Bolt M-8 | - | 6 | - | - | |
10 | BH191022 | Back rest assly passenger | - | 1 | - | - | |
10a | BH191067 | Foam passenger seat backrest - Z | - | 1 | - | - | |
11 | 39238315 | Nut - Hexagon with flange-M8 | - | 2 | - | - | |
12 | LAG00002 | Bolt | - | 2 | - | - | |
13 | BB221004 | Jack assly. | - | 1 | - | - | |
14 | KADD0630 | Bolt jack | - | 2 | - | - | |
15 | BH191062 | Frame passenger seat - Z | - | 1 | - | - | |
16 | 36AA4070 | Driver Seat Enclosur | - | 1 | - | - | |
17 | 24211037 | Enclosure - driver seat | - | 1 | - | - | |
18 | 24231806 | Bracket enclosure side mtg | - | 2 | - | - | |
19 | 05161256 | Clip nut-M6 | - | 4 | - | - | |
20 | KDBB0818 | Washer_plain | - | 3 | - | - | |
21 | KCEA0605 | Nut dome cap single piece-m6 x 1 | - | 1 | - | - | |
22 | KBUC0614 | Screw truss | - | 6 | - | - | |
23 | KCGC0606 | Nut hex flanged | - | 4 | - | - |
Specification | |
Quality | Bajaj Geniune Parts |
Model | RE DIESEL BS4 - PROVISIONAL |
Engine | RE DIESEL BS4 - PROVISIONAL |
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
+91 9970880000