Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
---|---|---|---|---|
01 | BB 1210 79 | Limiting device assembly BSIII | 1 | |
02 | BA 1022 44 | Packing | 1 | |
03 | BA 1220 20 | Cap fuel limiting device | 1 | |
04 | BA 1220 29 | Governor gear complete | 1 | |
05 | BA 1220 41 | Pin shaft governor | 1 | |
06 | BA 1220 32 | Stopper | 1 | |
07 | BB 1210 80 | Lever complete (1governor) | 1 | |
08 | BB 1210 82 | Lever (2 governor) | 1 | |
09 | LD A000 02 | Plain washer | 1 | |
10 | BB 1210 83 | Oil seal | 1 | |
10a | 39149819 | Oil seal | 1 | |
10b | BA 1220 30 | Gear - governor | 1 | |
11 | BB 1210 84 | Governor lever 3 | 1 | For BSIII |
11a | BA 1222 01 | Governor lever 3 | 1 | For BSII |
12 | BB 1210 85 | Shim | 2 | For BSIII |
12a | BA 1220 43 | Shim | 2 | For BSII |
13 | 39156706 | Spring dowel sleeve | 1 | NS |
14 | BA 1220 44 | Governor spring | 1 | |
15 | BB 1210 97 | ension spring (Idling) | 1 | For BSIII |
15a | BA 1220 45 | Tension spring (Idling) | 1 | For BSII |
16 | 39157006 | Spring dowel sleeve | 1 | |
17 | KH CA04 18 | Pin-spring | 1 | |
18 | 39143020 | Bearing - ball 6 X 19 X 6 | 1 | |
19 | BA 1220 34 | Collar - governor weight | 1 |
Specification | |
Quality | Bajaj Geniune Parts |
Model | RE 445 DSL |
Engine | RE 445 DSL |
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
+91 9970880000