Engine Assembly / Crankcase RH(Pulsar-RS-200-BS3)
- $0.00
Engine Assembly / Crankcase RH
(Pulsar-RS-200-BS3)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty. ABS | Qty. NON ABS | Remarks |
|---|---|---|---|---|---|
| 01 | JL 5010 04 | Assembly Engine 200 | 1 | 1 | N.I. |
| 02 | 36 JL00 04 | Kit Asly Crankcase RH | 1 | 1 | Refer Page No. 115 |
| 03 | 39193120 | Ball Bearing 28 X 68 X 18 | 1 | 1 | |
| 05 | LA D000 77 | Bolt Flanged M6x16 | 1 | 1 | |
| 04 | JG 5410 46 | Balancer Bearing Stopper | 1 | 1 | |
| 06 | JG 6010 07 | Special Shaft Seal Ring (oil) | 2 | 2 | |
| 07 | JU 5312 15 | Balancer Assly. | 1 | 1 | |
| 08 | 39260220 | Bearing - Ball 6202/HN3 | 1 | 1 | |
| 09 | DH 1013 83 | Precoated Flanged Bolt M6 | 1 | 1 | |
| 10 | JG 5410 59 | Plate Stopper Bearing Drum | 1 | 1 | |
| 11 | 39260120 | Bearing - Ball 61905 (25 X 42 X 9) | 1 | 1 | |
| 12 | LB B000 06 | Screw Pan head | 3 | 3 | |
| 13 | JU 5410 05 | Breather Plate | 1 | 1 | |
| 14 | 59200028 | Bearing Ball RH | 1 | 1 | |
| 15 | JG 5612 04 | Bolt Drum Stopper | 1 | 1 | |
| 16 | JG 5612 05 | Washer | 1 | 1 | |
| 17 | JG 5610 09 | Stopper Drum Complete | 1 | 1 | |
| 18 | 39200511 | Washer | 1 | 1 | |
| 19 | JG 5612 26 | Spring | 1 | 1 | |
| 20 | 39256220 | Bearing - Needle Roller 13X19X12 | 1 | 1 | |
| 21 | 39074601 | Screw Pan Cross - M6 | 1 | 1 | |
| 22 | JG 5410 45 | Input Shaft Bearing Stopper | 1 | 1 | |
| 23 | DP 1011 91 | Bolt Shifter | 1 | 1 | |
| 24 | JG 5710 14 | Oil Filter | 1 | 1 | |
| 25 | JG 5710 16 | O-Ring | 1 | 1 | |
| 26 | JL 5412 37 | Cap Oil Filter | 1 | 1 | |
| 27 | LA D000 63 | Bolt Flanged | 2 | 2 | |
| 28 | LE B000 01 | Circlip Internal | 1 | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar -RS-200-BS3 |
| Engine | 200 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
