HANDLE BAR (DISCOR 135 DRUM DISC BR)
- $0.00
HANDLE BAR
(DISCOR 135 DRUM DISC BR)
| Sub-part-figure Number | Item Code | Sub Part Name | 1 A Drum Br. | 1B Disc Br. | Remarks |
|---|---|---|---|---|---|
| 01 | DS 1810 44 | Handle | 1 | 1 | |
| 02 | 39171404 | Flanged bolt | 4 | 4 | |
| 03 | DJ 2010 24 | Control switch LH | 1 | 1 | |
| 04 | DS 2010 28 | Control switch RH | 1 | 1 | |
| 04 | DS 2010 33 | Control switch RH | 1 | -- | For KS |
| 05 | DJ 1910 53 | Holder Assly. LH | 1 | 1 | |
| 05 | DS 1910 36 | Holder Assly. LH | 1 | -- | For KS |
| 06 | DS 1910 38 | Holder Assly. RH | 1 | 1 | |
| 07 | DJ 1910 55 | Lever grip Left | 1 | 1 | |
| 08 | 29201117 | Front Brake Switch | 1 | 1 | |
| 09 | DD 1911 42 | Lever Brake RH | 1 | 1 | |
| 10 | DS 1810 08 | Damper handle upper | 2 | 2 | |
| 11 | DS 1810 09 | Damper handle lower | 2 | 2 | |
| 12 | DS 1810 10 | Washer handle lower | 2 | 2 | |
| 13 | 39042215 | Nylock Nut | 2 | 2 | |
| 14 | DS 1910 15 | Grip LH | 1 | 1 | |
| 15 | DS 1910 16 | Grip Assly. RH | 1 | 1 | |
| 16 | DS 1910 52 | Boot for lever LH | 1 | 1 | |
| 17 | DH 1810 22 | Handle bar weight | 2 | 2 | |
| 18 | 39242704 | Hex. soc.hd. cap screw | 2 | 2 | |
| 19 | DJ 2010 35 | Clutch Switch | 1 | 1 | |
| 20 | DJ 2210 03 | Mirror assly. LH | 1 | 1 | |
| 21 | DJ 2210 04 | Mirror assly. RH | 1 | 1 | |
| 22 | 30191048 | Band | 2 | 2 | |
| 23 | DS 1810 22 | Switch assly.ignition | 1 | 1 | |
| 24 | 39194304 | Flange bolt | 2 | 2 | |
| 25 | DS 1810 05 | Holder Fork Upper | 1 | 1 | |
| 26 | DS 1810 07 | Washer handle Upper | 2 | 2 | |
| 27 | DS 1910 18 | Boot For Lever RH | 1 | 1 | |
| 28 | DU 2010 46 | Plunger with Spring | 1 | 1 | Part of Ride Control Switch |
| 29 | DS 1810 06 | Holder Up | 1 | 1 | |
| 30 | DS 1810 19 | Holder lower | 1 | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Discover 135 Drum Br. / Disc Br. |
| Engine | 135 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
