CRANCASE LH(Bajaj Avenger 180 SPC)
- $0.00
CRANCASE LH
(Bajaj Avenger 180 SPC)
| Sub-part-figure Number | Item Code | Sub-Part Name | Quantity | Serviceable | Chasis Number |
|---|---|---|---|---|---|
| 01 | DH101582 | CRANKCASE - LH | 1 | Y | |
| 02 | 39253105 | STUD - M10 | 2 | Y | |
| 03 | DH101226 | GUIDE - STARTER ASSEMBLY | 1 | Y | |
| 04 | 39218819 | SEAL - OIL | 1 | Y | |
| 05 | DH101423 | RING - O (GUIDE STARTER) | 1 | Y | |
| 06 | 39075201 | SCREW - COUNTERSUNK CROSS :- M6 | 3 | Y | |
| 07 | 39260320 | BEARING - BALL 6202-RS1/HN3 15X35X11 | 1 | Y | |
| 08 | 39258320 | BEARING - BALL :- 6004 HN3 SKF | 1 | Y | |
| 09 | 39218520 | BEARING - DEEP GROOVE BALL | 1 | Y | |
| 10 | 39218919 | SEAL - OIL | 1 | Y | |
| 11 | 39219019 | SEAL - OIL | 1 | Y | |
| 12 | DH101203 | PIPE - BREATHER | 1 | Y | |
| 13 | DH121046 | SPRING (CO) | 1 | Y | |
| 14 | 28101174 | CLIP - SPRING | 1 | Y | |
| 15 | DH101272 | PLUG | 1 | Y | |
| 16 | DG101498 | GASKET | 1 | Y | |
| 17 | 31201081 | SWITCH - NEUTRAL | 1 | Y | |
| 18 | DH101264 | GASKET -NEUTRAL SWITCH | 1 | Y | |
| 19 | DH101269 | BAFFLE | 1 | Y | |
| 20 | 39141402 | SCREW -CROSS RECESSED RAISED CHEESE HEAD | 1 | Y | |
| 21 | 39184504 | BOLT - HEXAGON WITH FLANGE | 1 | Y | |
| 22 | 39167704 | BOLT - M6 X 45 | 8 | Y | |
| 23 | 39230504 | BOLT - HEXAGON HEAD WITH FLANGE :- M8 | 1 | Y | |
| 24 | DH101422 | DAMPER - AXIAL (RUBBER) | 1 | Y | |
| 25 | DH101169 | BUSH - STARTER GEAR INNER | 1 | Y | |
| 26 | DV201006 | CABLE ASSY EARTH,BAT-CHASSIS- ENGINE | 1 | Y | |
| 27 | 39244811 | WASHER - PLAIN | 1 | Y |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Avenger 180 SPC |
| Engine | 180 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
