Front Fork(Platina 100ES & KS_BS IV)
- $0.00
Front Fork
(Platina 100ES & KS_BS IV)
| Sub-part-figure Number | Item Code | Sub Part Name | ES Qty. | KS Qty. | Remarks |
|---|---|---|---|---|---|
| 01 | PF 1210 43 | Front Fork Assembly | 1 | 1 | |
| 01 | PF 1210 88 | Front Fork Assembly | 1 | 1 | Comfortec (June 16) |
| 01 | JK 1210 24 | Fork Assembly Front | 1 | -- | Platina 100UG Aug. 17 |
| 02 | PF 1210 57 | Outer Pipe LH | 1 | 1 | |
| 03 | PF 1210 64 | Outer Pipe RH | 1 | 1 | |
| 04 | 30181025 | Bolt Socket Head | 2 | 2 | |
| 05 | 30181026 | Gasket | 2 | 2 | |
| 06 | DD 1810 32 | Seal Dust | 2 | 2 | |
| 06A | PF 1210 73 | Seal Oil | 2 | 2 | |
| 06A | DU 1811 08 | Seal Oil | 2 | -- | BS IV |
| 06B | 31181108 | Ring -Snap: Endu Sys | 2 | 2 | |
| 07 | 36 PA01 21 | Cylinder Complete Fork | 2 | 2 | Refer Kit List |
| 07 | 36 PF01 13 | Cylinder Complete Fork | 2 | -- | BS IV |
| 08 | PA 1210 42 | Fork Pipe Spinning | 2 | 2 | |
| 08 | PF 1211 01 | Fork Pipe Spinning | 2 | 2 | Comfortec (June 16) |
| 09 | DJ 1811 04 | Spring Main | 2 | 2 | |
| 09 | PF 1210 74 | Spring Main | 2 | 2 | Comfortec (June 16) |
| 10 | 30181029 | 'O' Ring | 2 | 2 | |
| 11 | DS 1810 12 | Bolt Fork | 2 | 2 | |
| 12 | 59040006 | Hex Bolt | 2 | 2 | |
| 13 | PF 1210 76 | Assembly Under Bracket | 1 | 1 | |
| 14 | 39078912 | Washer Spring | 2 | 2 | |
| 15 | 39118101 | Bolt Hexagon Head M8X40 | 2 | 2 | |
| 16 | DS 1810 15 | Cap Nut Fork | 1 | 1 | |
| 17 | JK 1210 07 | Guide Bush | 2 | 2 | |
| 18 | JK 1210 09 | Washer Guide Bush | 2 | 2 | |
| 19 | JK 1210 08 | Spacer Tube | 2 | 2 | |
| 20 | DM 1810 10 | Washer | 2 | 2 | |
| 21 | PF 1210 99 | Leg Assembly LH | 1 | 1 | Comfortec (June 16) |
| 22 | PF 1211 00 | Leg Assembly RH | 1 | 1 | Comfortec (June 16) |
| Specification | |
| Model:Platina ES / KS BS IV UG | 8 |
| Quality | Bajaj Geniune Parts |
| Engine | 100 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
